BSS has built an international reputation for digital signal processing in response to requests from professional musicians. From direct audio systems to studio installations, BSS products are powerful and ergonomic examples of the benefits of targeted research, design excellence and scrupulous quality assurance.
The Soundweb London Analog Output Card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. This analog card enables Soundweb London devices to send line level signals. The Analog Output Card has two Combicon connectors which are used as follows: Connector 1Balanced / Unbalanced Audio, Channel 1 - Mic/LineBalanced / Unbalanced Audio, Channel 2 - Mic/LineConnector 2Balanced / Unbalanced Audio, Channel 3 - Mic/LineBalanced / Unbalanced Audio, Channel 4 - Mic/Line 4 Analog Outputs line Output Type: balanced/unbalanced
The Soundweb London analog input card is designed to fill any of the four Soundweb London card slots BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU- 160, BLU-120. , BLU-80, BLU-32 and BLU-16 Peripherals. This analog card allows Soundweb London devices to receive microphone / line level signals. The Soundweb London Analog Input Card offers channel-configurable phantom power and software-controlled analog gain in 6 dB increments from 0 dB to 48 dB. The analog input board has two Combicon connectors that are used as follows: Connector 1Symmetrical / unbalanced audio, channel 1 - Mic / LineSymmetrical / unbalanced audio, channel 2 - Mic / LineConnector 2Symmetrical / unbalanced audio, channel 3 - Mic / LineSymmetrical / unbalanced audio, channel 4 - Mic / Line4 analog microphone inputs per line Type of entry: balanced / unbalanced Phantom power
The FCS-960 is a 30-band graphic equalizer with Dual Mode function to switch between Normal and Fine filter width settings on each channel. The FCS-960 provides two channels in 3U of rack space. Constant Q filters with central filter taps are controlled by high quality 45mm faders with molded polymer fader buttons that eliminate visual parallax errors, even in low light conditions. Also included are the high-pass filter, gain control, and balanced and switchable electronic inputs and outputs.3U chassis 2 XLR input connectors 2 XLR output connectors 30 equalization bands per channel (60 total) Constant-Q filter Equalization gain: inf to + 10dB Peak indicator of 18 dBu (LED) Bypass switch
The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a fault-tolerant, high-bandwidth digital audio bus. The BLU-100 features a fully configurable open architecture via HiQnet ™ London Architect. A rich palette of processing tools and logical objects and a drag-and-drop configuration method provide a simple and familiar design environment. This processor features a low-latency, fault-tolerant, 488-channel digital audio bus that uses standard 5e cabling for 100 m distance between compatible devices. Fiber optic media converters can be used to increase the distance between devices to more than 40 km. The BLU-100 is compatible with the entire Soundweb London family, and its 48-channel digital audio bus represents channels 1-48 of the larger 256-channel digital audio bus when integrated with the BLU-800, BLU-320 , BLU-160, BLU-120 and BLU-BOB devices. The analog inputs provide software configurable gain in steps of 6dB up to + 48dB per channel and software selectable phantom power per channel. The phantom power, the present signal and the clip information per channel are easily accessible,...
The Soundweb London BLU-32 offers configurable I/O and CobraNet audio. The BLU-32 is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features CobraNet audio with primary and secondary ports for fault tolerance. Control is through a separate Ethernet port which allows CobraNet and control networks to be easily separated or mixed depending upon requirements. Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicateddatasheets) Phantom Power, Sync, Signal Present and...
The Omnidrive is a broadcast system controller for audio signal processing before power amplification, designed to handle the most complex speaker configurations (multicast / multi-amplification). 3-way stereo, 2-way stereo plus "sub" via input C Triple bi-amplification for stage feedback systems with delay and equalization 96 kHz Studio Listening Systems LCRS monitoring (post-productions) 6-way mono system, 4 channels plus 2 full-band outputs with separate delay and equalization Distribution on 6 zones (full band outputs with delay, equalizers and limiters on each zone)
Equalizer 2 x 30 bands, equipped with a separate corrector, type "loudness" which corrects the signal in a global way. Graphic Equalizer 2 x 30 ISO Frequency Bands, Constant Q Filters High-pass filter with sliding frequency, Independent correction at 6 dB per octave at 50 Hz and 14 kHz of +/- 6 dB efficiency Low / high contour function 45 mm faders Gain control Overload indicator Dynamic: greater than 115 dB Balanced Inputs & Outputs: XLR / Jack