The equalizer at Fasila Music
An equalizer is a sound processing device. It allows to filter or to amplify different frequency bands composing an audio signal. This type of processing can be used when taking sound, mixing or sound. The equalizer can be analog or digital, in the form of equipment or software.
If you do not find your happiness, do not hesitate to contact us, other references of the brands presented in this tab are available to order.
The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1215 provides standard features like dual channels, 15 2/3 octave bands, ISO frequency centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other thoughtful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations....
The dbx® 12 series has been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of simple controls. The 1231 provides standard features such as dual channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range and 40Hz interchangeable low cut filters / 18 dB per octave, but also include other features. These include 45mm faders; Selectable +/- 6dB or +/- 15dB boost / cut range for accurate gain adjustments; XLR, barrier strip and 1/4 "TRS connectors for easy installation; Balanced inputs and outputs for quiet operation; And the ground lifting capabilities of the chassis / signal for fast isolation. The visionary design of the dbx 12 series makes your job easier. The Dbx 12 Series EQs have been precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, the electronically balanced / unbalanced inputs and the servo / unbalanced outputs, the RF filtered inputs and outputs, and the hard cable relay offset with 2 seconds power-up delay were the steps our engineers have taken to ensure the...
The FCS-960 is a 30-band graphic equalizer with Dual Mode function to switch between Normal and Fine filter width settings on each channel. The FCS-960 provides two channels in 3U of rack space. Constant Q filters with central filter taps are controlled by high quality 45mm faders with molded polymer fader buttons that eliminate visual parallax errors, even in low light conditions. Also included are the high-pass filter, gain control, and balanced and switchable electronic inputs and outputs.3U chassis 2 XLR input connectors 2 XLR output connectors 30 equalization bands per channel (60 total) Constant-Q filter Equalization gain: inf to + 10dB Peak indicator of 18 dBu (LED) Bypass switch
2 x 31-band stereo equalizer using balanced and unbalanced outputs / inputs for connection and 19-inch rack format. The EQS 62 is a professional sound processing tool for modifying the sound level in frequency bands. One can thus modify the sound reproduction of a source, by attenuating or increasing certain parts of its spectrum to improve its sound.1/3 octave stereo equalizer Constant Q factor filter High-pass filter: 10Hz to 250Hz, 12dB / Oct Low pass filter: 3kHz to 40kHz, 12dB / Oct Adjustable output level: + 12 / -12 dB 20 mm faders Frequency response: 20 Hz - 20 kHz Frequency setting: +/- 12dB (+/- 0.5 dB) Balanced Inputs: XLR, Jack 6.35 TRS Asymmetric inputs: RCA Balanced Outputs: XLR, Jack 6.35 TRS Asymmetrical outputs: RCA REC OUT output on unbalanced RCA (output level -6 dB) Signal level indicator: -10db, 0db, + 10db, + 17db Low cutting indicator and bypass Signal-to-noise ratio: -94dB Rackable 19 " 2 units
2 x 15-band stereo equalizer using balanced and unbalanced outputs / inputs for connection and a 19-inch rack format. The EQS 30 is a professional sound processing tool for modifying the sound level in frequency bands. One can thus modify the sound reproduction of a source, by attenuating or increasing certain parts of its spectrum to improve its sound.Stereo Equalizer, 2/3 Octave from 31.5 hz to 16 khz Adjustable output level: + 12 / -12 dB 20 mm faders Frequency response: 20 Hz - 20 kHz Frequency setting: +/- 12dB (+/- 0.5 dB) Low cut filter per channel (60 Hz -3db) Balanced Inputs: XLR, Jack 6.35 TRS Asymmetric inputs: RCA Balanced Outputs: XLR, Jack 6.35 TRS Asymmetrical outputs: RCA REC OUT output on unbalanced RCA (output level -6 dB) Signal level indicator: -10db, 0db, + 10db, + 17db Low cutting indicator and bypass Signal-to-noise ratio: -94dB Rackable 19 " 1 Unit
More than 30 years ago, the TAPCO range was already recognized for its high-quality and affordable audio mixers and graphic equalizers for musicians. Today, Mackie continues this tradition by offering the Tweeq T-231, a dual 31-band graphic equalizer with exceptional construction, high-precision sliders, well thought-out features and excellent sound quality.Rack-mountable 31U 2U dual band graphic equalizer with ready-to-go construction and excellent sound quality High precision EQ sliders with smooth and reliable feel Switchable control range of 6/12 dB for wide or fine adjustment High-pass filter @ 40 Hz to remove unwanted low frequencies from small speakers Low-pass filter @ 16 kHz to remove unwanted high frequencies Bypass Switch allows fast A / B comparisons Independent signal signal indicators on each channel Output Gain control for EQ signal correction RCA, TRS and XLR connections on the rear panel
Klark Teknik has a reputation for providing the highest quality signal processing equipment. Innovative electronic designs, sophisticated production techniques and draconian quality control give products with unrivaled sound quality and reliability. These products have many fans in sound systems, broadcasting, recording studios, post production and permanent installations. Graphics Equalizer 2x 30 bands Effective 25 to 20 kHz 45 mm faders Proportional slope + / 12 dB switchable Low cut filter adjustable from 20 to 500 Hz Adjustable high-cut filter from 2 kHz to 20 kHz 2x notch filters per channel Balanced Inputs 19 "rack format 3U
Klark Teknik has a reputation for providing the highest quality signal processing equipment. Innovative electronic designs, sophisticated production techniques and draconian quality control give products with unrivaled sound quality and reliability. These products have many fans in sound systems, broadcasting, recording studios, post production and permanent installations. Equalizer 2x30 bands Frequency range: 25 Hz - 20 kHz Front Peak Indicator Faders with 45 mm stroke and center notched position Adjustable frequencies of 6 or 12 dB Gain -80 / + 6dB HP Parametric Filter 20-500 Hz Parametric TP filter 2kHz-20kHz 2 parametric notch filters per channel Rackable Electronic balanced inputs, inputs and outputs on XLR sockets. Removable power cable Earthing switch Brushed aluminum finish
Behringer FBQ2496 is the fastest feedback suppressor (> 0.2 sec.) And one of the few on the market to benefit from a 96 kHz resolution. Using an ultra-fast feedback detection algorithm, its automatic and "intelligent" operation locates up to 20 hooking frequencies per channel, which it destroys with extremely narrow Notch filters leaving the original signal virtually unchanged. In a moment, the default function "Set-and-Forget" as well as the Panic button allow to remove the feedbacks without modifying the signal or almost! Auto mode analyzes the signal continuously and automatically resets the already programmed filters, while manual mode allows to adjust up to 40 fully parametric filters (three parameters: frequency, bandwidth and level) individually and manually. The FEEDBACK DESTROYER features an open MIDI architecture for future software upgrades and easy communication with other digital equipment. Its different modes of operation will be useful as much to you to manage live events as to make of the sound creation.
The ULTRAGRAPH PRO FBQ3102 is a professional 31-band stereo graphic equalizer that controls both live and studio situations. Thanks to its fantastic FBQ feedback detection function (patent pending), which instantly identifies hook frequencies and can also be used as a spectrum analyzer, the FBQ3102 is indispensable to any rack. But this is not all: with the ULTRAGRAPH PRO, add punch to your music with the mono subwoofer output with adjustable cutoff frequency and instantly remove residual noises from floor vibrations or magnetic tape thanks to Low-cut and high-cut filters adjustable on each channel. The level adjustment is also childish with the 12-segment LED input / output display and the input gain control. The FBQ3102 features uncompromised components such as ultra-low-noise operational amps for exceptional sound performance, gold-plated, gold-plated jack and XLR inputs and outputs, high-quality light faders, The bright keys. With its comprehensive features designed for intensive and everyday use, the FBQ3102 will never let you down.
Equalizer 2 x 30 bands, equipped with a separate corrector, type "loudness" which corrects the signal in a global way. Graphic Equalizer 2 x 30 ISO Frequency Bands, Constant Q Filters High-pass filter with sliding frequency, Independent correction at 6 dB per octave at 50 Hz and 14 kHz of +/- 6 dB efficiency Low / high contour function 45 mm faders Gain control Overload indicator Dynamic: greater than 115 dB Balanced Inputs & Outputs: XLR / Jack
The DBX 2031, is an intuitive interface to full level controls. DBX succeeds in maintaining a very high level of quality while offering an atractive price. These series 2 EQs offer an input gain of +12 dB, gains or attenuations by switchable bands between +6 or +12 dB, inputs / outputs on a 6.35 mm XLR / Jack connector, and faders Of 20 mm.The 2031 represents a major step forward in improving the quality of entry-level graphic correctors, offering a dynamic range of 108 dB, and a toroidal transformer with an amazing frequency response of 10 Hz to 50 kHz 31-Band Mono Graphic Equalizer 4x indication LED 45 mm fader Frequency response: 20 Hz - 20 kHz Low cut filter 40 Hz Inputs and outputs in XLR, 6.3 mm jack and B-Strips, balanced inputs and outputs, Peak limiter 2U rack format Integrated power transformer. Possibility of decoupling of the earth and of the chassis, Low cut filter 18 dB / octave at 40 Hz Bessel type, Input gain range of -12 dB / + 12 dB, Selection of the efficiency range (between...
The DBX 2231 is a 1/3 octave two-channel equalizer with 45 mm sliders. It measures 3 U of height, and quickly imposed itself like a classic in sonorisation, facade like returns. All controls on the front panel are very clear and logical. The central operating frequencies are arranged in accordance with the ISO standard, from 20 Hz to 20 kHz. Revolutionary Noise Reduction DBX TYPEIIITM capable of reducing intrinsic noise by 20 dB Exclusive dbx PeakPlusTM limitation system for added protection Selection of the efficiency range (between ± 6 dB and ± 15 dB) Symmetric inputs and outputs Connections via XLR, terminal block and 1/4 "jacks Input gain range of -12 dB / + 12 dB Low cut filter 18 dB / octave at 40 Hz type Bessel Possibility of decoupling the ground and the chassis Integrated Power Transformer
With the 2 series, DBX succeeds in maintaining the very high quality of its products, while offering a price adapted to the lowest budgets. Equalizers of the 2 series offer an input gain of +12 dB, gains or attenuations by bands switchable between +6 or +12 dB, inputs / outputs on XLR connector and on a 6.35 mm jack, faders 20 mm, intuitive user interface and full level control.Due to their amazing frequency response from 10 Hz to 50 kHz, their dynamic range of 108 dB and their toroidal transformer, the Series 2 devices represent a major step forward in improving the quality of entry-level graphics . Equalizer 2 x 31 bands Switchable: +/- 6 or +/- 12 dB Low cut 50 Hz Frequency response: 10Hz to 50kHz, + 0.5 / -3dB Signal to noise ratio: -90 dB Harmonic distortion less than 0.004% Revolutionary Noise Reduction DBX TYPE III ™ capable of reducing intrinsic noise by 20 dB Exclusive DBX PeakPlus ™ limitation system for added protection Selection of the efficiency range (between ± 6 dB and ± 15 dB) Symmetric inputs and outputs Connections via XLR, terminal block and 1/4 "jacks...