After more than 40 years of intense activity in the world of audio, D.A.S. has acquired a valuable know-how in the development and manufacture of sound reinforcement systems. Recognized around the world for its quality products and customer oriented service, the company’s highly qualified staff is dedicated to designing and building an extensive line-up of products used wherever reliability and sound quality are requisite. The company headquarters is located in Valencia, Spain and occupies approximately 24,000 square meters (260,000 square feet) in Spain’s largest industrial park, the second largest in Europe.
D.A.S. has an extended network of dedicated distributors across the globe. They are actively supported by regional sales and distribution centers located in Singapore and Miami, Florida, providing clients with the rapid response needed in today’s demanding market. Exceptional customer support, both before and after the sale, on-site technical training seminars and long-lasting business relationships are just a few of the reasons that have made D.A.S. above all, the professional’s choice.
D.A.S. Audio is committed to innovation and the development of high-quality products. The R&D department employs highly qualified professionals and state-of-the-art technology allowing the company to undertake ambitious projects and compete with the best. D.A.S. has secured its position as a market leader in the sound reinforcement industry while continuing to establish itself worldwide and develop new products that satisfy the requirements of an ever-changing market.
Active subwoofer Rated amplifier power LF: 500 W peak - 250 W continuous Frequency range (-10 dB): 40 Hz - 200 Hz SPL max at 1 m: 121 dB Internal crossover: variable LPF 90 Hz - 170 Hz Connectors: INPUT: 2 x XLR Female LOOP THRU: 2 x XLR male AC ENTRY: IEC AC requirements: 115 V, 2.8 A, 50 Hz / 60 Hz 230 V, 1.4 A, 50 Hz / 60 Hz Case material: Birch plywood Black color
Passive subwoofer RMS power: 250 Watts Peak power: 1000 Watts Frequency range (-10 dB): 40 Hz to 200 Hz Rated impedance: 8 ohms Sensitivity on the axis 1 W / 1 m: 94 dB SPL max at 1 m: 121 dB Case material: Birch plywood Color: Black or White Connectors: 2 x NL4 SpeakON
Passive speaker RMS power: 80 Watts Peak power: 320 Watts Frequency range (-10 dB): 150 Hz to 20 kHz Sensitivity on the axis 1 W / 1 m: 93 dB SPL max at 1 m: 118 dB Transformer: 15 / 30 / 50 W (100 V) ou 7,5 / 15 / 25 W (70 V) Dispersion: 120º H x 30º/45º V Case material: Aluminum Colour : Any RAL color Connectors: Phoenix 2.54 mm 2 way
Passive speaker RMS power: 40 Watts Peak power: 160 Watts Frequency range (-10 dB): 150 Hz to 20 kHz Sensitivity on the axis 1 W / 1 m: 90 dB SPL max at 1 m: 112 dB Transformer: 10 / 20 / 30 W (100 V) ou 5 / 10 / 15 W (70 V) Dispersion: 120º H x 70º/90º Case material: Aluminum Colour : Any RAL color Connectors: Phoenix 2.54 mm 2 way
Passive speaker RMS power: 20 Watts Peak power: 80 Watts Frequency range (-10 dB): 150 Hz to 20 kHz Sensitivity on the axis 1 W / 1 m: 87 dB SPL max at 1 m: 106 dB Transformer: 7.5 / 15/20 W (100 V) or 3.5 / 7.5 / 10 W (70 V) Dispersion: 120º H x 120º V Case material: Aluminum Colour : Any RAL color Connectors: Phoenix 2.54 mm 2 way
Protective cover for ALTEA 415 / 415a / 715 / 715a black. Protective cover for ALTEA 415 / 415a / 715 / 715a black.
The Vantec 218A is an amplified bass subwoofer designed to provide extended bass response to wide range Vantec speakers. A powerful amplifier drives two DAS 18LX long excursion bass drivers incorporating 4 "acoustic coils and massive magnet structures for high power and impressive output power. The Vantec 218A is powered by a class D amplifier with switching power supply and a nominal power of 4000 Wpeak. The system includes two balanced (AB) inputs with stereo HPF filtered output for satellite systems. Removing the HPF filter provides stereo "loop" connections. The variable low-pass filter varies from 80 Hz to 125 Hz. Gain control and reverse polarity increase user control over the system. The compact Vantec 218A cabinet is made of birch plywood and is coated with a heavy duty ISO-flex black paint coating for added durability. Powder coated steel front grille protects DAS components. The handles on the sides and back of the cabinet and two wheels at the back facilitate the movement of the box.4000 W peak Class "D" EQ Presets: Deep, Strong - Variable Low Pass Filter Sub-level level control, polarity...
The Vantec 15A is a power supply system with a multi-angle housing that enables stage monitor applications as well as a compact sound system. The 1500 W peak power of the Class D amplifier provides extended bandwidth, extended dynamic range, and exceptionally low distortion characteristics, hard to find on other systems in this market segment. Finite Impulse Response (FIR) filters are used in the signal processing of powered Vantec systems. User-configurable harmonization, filter and equalization modes, as well as gain control, are achieved using a rotary knob interface and an LCD display on the back of the cabinet. The Vantec series allows users to stream music wirelessly from mobile devices. The 15FV4 speaker provides accurate reproduction of low frequencies. The high frequencies are managed by the optimized M-28 FEM compression driver with a 1 "output offering excellent performance.Compact multi-purpose system with monitor positionUltra-light class D amplifier with SMPSUser-definable 24-bit DSP with LCD displayPresets: Live, Dance, Voice, Bass Boost, Voice & FashionStackable 3-band EQHigh Definition Wireless...
Event 208A is a three-way linear network in a dual 8 "configuration, and the DAS speakers have been paired with a single M-75 compression driver and specially designed injected aluminum high-frequency waveguide. The 208A line of lines is powered by a three-channel Class D amplifier that provides 360 Wpeak per channel. The rear panel of the amp includes quality Neutrik® XLR and powerCON connectors, status LEDs for easy setup and the Easy-DSP ™ DAS interface that simplifies the selection of presets for the number of units and the projection depth.Amplification: class D Peak Power: HF (360W) - MH (360W) - LF (360W) SPL at 1m: 132 dB Frequency response (-10 dB): 75 Hz to 20 kHz Motorized 3-way system Slight topology of class D amplifiers High end DSP chipsets Easy-DSP ™ interface Quality Neutrik® connectors High quality birch construction Durable ISO-flex finish Robust "quick-rig" professional hanging equipment Patented injected aluminum HF waveguide (not plastic) DAS M-75 compression and cone transducers
The EVENT-M210A is a three-way stage monitor in a dual 10 "dual-band configuration providing a wide range of frequencies. The DAS speakers have been paired with a single M-60 compression driver and a specially designed high-frequency injected aluminum waveguide. The EVENT-M210A wedge is powered by a three-channel Class D amplifier that provides 360 Wpeak per channel. The rear panel of the amp includes quality Neutrik® XLR and powerCON connectors, status LEDs for easy setup.Motorized 3-way system Peak Power: HF (360W) - MF (360W) - LF (360W) Amplification: Class D SPL at 1m: 132 dB Frequency response (-10 dB): 70 Hz to 20 kHz Horizontal coverage (-6 dB): 60º Vertical coverage: 20º Up-30º Down Lightweight topology of class D amplifiers High-end DSP component sets Easy-DSP ™ interface Quality Neutrik® connectors Birch construction of superior quality Durable ISO-flex finish Patented injected aluminum HF waveguide (not plastic) DAS M-60 compression driver
The EVENT-121A is an active subwoofer system that incorporates a single 21 "speaker for low frequency reproduction.Precise and deep bass! Power: 1600 Watts RMS Amplification: class D SPL at 1m: 141 dB Frequency response (-10 dB): 30 Hz to 125 Hz
The Aero 12 is a compact linear system EN54-24 certified. This unique product allows the site's PA system to double as a voice alarm system eliminating unnecessary duplication while increasing profitability. Power: 250 Watts RMS Impedance: 8 Ohms 1W / 4M sensitivity: 81.4 dB SPL SPL at 4m: 107dB Frequency response (-10 dB): 62 Hz to 22 kHz EN54-24 Certified line array system 12 "speaker with magnetic neodymium assembly M-75N Neodymium compression system with 1.5 "output High frequency wave generator SERPIS Captive hanging system integrated into the cabinet design
The system incorporates an impressive battery of high-tech features that bring compact linear array systems to unprecedented levels of performance. The Aero 12A's two-channel amplifier design sets a new benchmark in the industry for audio performance, efficiency and power density. The 600 W amplifier offers extended bandwidth, improved dynamic range and exceptionally low distortion. Compact and lightweight, its high power density of more than 20 W per cubic inch enhances an amplifier design that requires much less space, reducing overall cabinet size and overall cabinet weight important attribute for flying systems. Signal processing is performed using a powerful 24-bit DSP processor for unmatched control of critical signal parameters. Finite Impulse Response (FIR) filters are used in Aero 12A signal processing.RMS power: LF: 2x700W - MF: 700W - HF: 300W Horizontal dispersion: 90 ° nominal SPL at 1m: 134 dB Frequency response (-10 dB): 63 Hz to 20 kHz
The Aero 20A is a compact line array system that incorporates the ALAS ™ philosophy and is inspired by the amazing success of the "all-purpose" Aero 12A capabilities, launched in 2009. The Aero 20A motorized incorporates the latest DAS engineering achievements in transducer design, power electronics and system management. The mid-bass range incorporates a new 12 "DAS loudspeaker optimized for high output and reliability, a lightweight aluminum voice coil glued to a new fiberglass reinforced cone, an optimized magnetic circuit, and a new design. suspension significantly contributed to the 12AN4's outstanding performance in terms of distortion, power and maximum SPL.New Amplifier 800 W RMS LF + 400 W RMS HF Class D SPL at 1m: 136 dB Frequency response (-10 dB): 60 Hz to 20 kHz Horizontal coverage (-6 dB): 90º Remote control and control DASnet ™ New quick assembly system for easy hanging / stacking New speaker 12AN4 Improved M-75N compression driver New HF waveguide designed Improved overall performance and SPL rate IP43 higher
The HQ-112.43 is designed for medium and large installations such as arenas, auditoriums, stadiums and theaters. HQ models offer tightly controlled coverage patterns and high output capabilities that can be used individually or in multiple arrays. Standard enclosures incorporate advanced interior and exterior coatings for weather resistance and durability in extreme environments.Power: 400 Watts RMS Impedance: 8 Ohms 1W / 1M sensitivity: 111 dB SPL SPL at 1m: 142 dB Frequency response (-10 dB): 80 Hz to 18 kHz Bidirectional long range system 12 "low frequency loudspeaker Tweeter M-78N Selectable passive / biamplified modes of operation 40º x 30º narrow coverage angles - Swiveling horns Stainless steel rigging kit
The SF-112 is a three-way system designed for high-level dance clubs. Two large fiberglass horns with medium and high frequency sections dominate the front of the cabinet. Crisp, articulate and strong, set the SF-112. Front-mounted two-ball tweeters provide the ultra-high frequency reproduction required for dance systems. Passive enclosure Power: 500 Watts HP 12 " M-75N neodymium compression compressor Double ball tweeters for very high frequency Impedance: 8 Ohms 1W / 1M sensitivity: 109 dB SPL SPL at 1m: 142 dB Frequency response (-10 dB): 80 Hz - 20 kHz Dispersion: 90º x 50º Custom color schemes Specific material for rigging and stacking
The DSP-4080 is a powerful DSP-based audio processor, ideal for installed and live applications, where it combines the features of a multitude of conventional products in a compact unit. 4 entries and 8 exits 9 full band parametric bands available on each output Crossover filters on each output with a response of 48 dB / oct Adjustable gain on the inputs and outputs RS232 and RS485 ports for remote control via AudioCore software Distortion (THD): <0.02% at 1 kHz, +18 dBm Dynamic range:> 116 dB unweighted 20 Hz-20 kHz Frequency response: 20 Hz-20 kHz (+ 0 / -0.50 dB) - 32 kHz (-3 dB)
The LX-218CA is a powered subwoofer system designed to deliver exceptional performance in terms of power output, bandwidth expansion and distortion. The LX-218CA incorporates the long excursion cone transducer 18LXN. The newly developed 18LXN speakers are a significant improvement over their predecessors offering better power management, reduced distortion and power compression.Powered high performance subwoofer system Amplification class D Power: LF 2400 Watts SPL at 1m: 142 dB Frequency response (-10 dB): 28 Hz to 100 Hz Two long-range speakers 18LXN Front-loading bass-reflex configuration